NAC Machines

Think beyond the world.........

Regulations of paper cup machine parts debugging

Debugging of paper feeding length of Cup Bottom Paper

♦ In order to save paper, adjust the paper feeding length of cup bottom paper so that it is just enough to use and continuous, the method of adjustment: loosen the fastening screw, adjust the position of the slider and debug the paper feeding length, if the length isn’t proper, readjust the position of the slider till it is proper, and then lock the fastening screw.

Debugging of Edge Folding Degree of Cup Bottom.

♦ The edge folding degree of cup bottom is affected by the following two aspects:

♦ a. The shaped size of the paper cup wall.

♦ b. Adjust the upper and lower positions of the bottom folding mould till the cup bottom is totally sealed by the folded edge.

Debugging of Pattern Depth of Cup Bottom:

The knurling quality of the internal edge of the cup bottom is one of the key factors to decide whether the paper cup leaks or not. It is the best that the pattern is clear but does not extend to the external surface. The method of adjustment is as follows:

♦ a. If the pattern is not clear, tighten the adjusting screw.

♦ b. If the pattern extends too much to the external surface, loosen the adju-sting screw. After finishing adjustment, do not forget to lock the fastening nut.

Debugging of Rolling Degree of Cup Rim:

The rolling degree of the cup rim affects the harness and appearance of the shaped cup. In general, it is the best to roll the cup rim for one circle and a third. Its adjusting method is as follows:

♦a. Adjust the shaping size of the cup wall.

♦b. Adjust the position of the upper mould push rod of rolled rim.

The first procedure of paper cup making is cup wall shaping, which has a bearing on the size of paper cup.

♦ The method of adjustment: Adjust the position of the cup wall paper to the edge ironing mould through adjusting the left and right locating stop rods and the left and right push rods, thus adjusting the size of paper cup.

Our business support

1. Business start up process and guidelines

2. We offer free website with 10 pages to our clients for marketing asssistance

3. Sample project report format for bank loan purpose

4. Sample profit and loss report to know the project feasibility

5. Get various paper cup mould drawings

6. We recommend to follow the machine safety policy

7. All kind of paper cup and plate machine spares and accessories available

Facebook Twitter

Technical Information

  • 100% Indian made spare parts
  • Trible chain on Index
  • LT/Siemens/Autonix/Ideal/Kundan
  • Heavy Weight
  • Remote Control Operation
  • Complete Bearing Moves
  • More than 50% HRC Chrome Shaft
  • Chrome/Blacken Coated parts
  • Ball Joint Connectors
  • 3 Year Carry-in Warranty
  • Precious Alignment
  • TVS Bolt/SKF/ADB
  • Single/Three Phase power option
  • HSS/BM/MS/EN8/EN24/SS Metals
  • Simple Electrical diagrams